|
Advanced Search |
Mobil Chassis Grease LBZ
Automotive Grease
Mobil Chassis Grease LBZ is a semi-fluid grease based on synthetic oils in the consistency group NLGI 00. It was specifically developed for central lubrication systems for commercial vehicles. The product contains anti-oxidants, corrosion inhibitors, extreme pressure and anti-wear additives. Due to its special formulation and semi-fluid consistency, Mobil Chassis Grease LBZ exhibits excellent flow even at very low temperatures and in long pipelines. Depending on the application, it can flow at -25°C. The oil film adheres well and does not run off, even during stoppages. There is rapid on-flow to the greasing points. Mobil Chassis Grease LBZ is highly water resistant and therefore stable during water wash. It is stable in cold to warm water, therefore it can also be used in damp conditions or when there is warm water ingress. The good protection against rust also covers the use of ‘spreading’ salt and the related danger of rust on the lubrication points of the chassis. Mobil Chassis Grease LBZ is compatible with seals made of NBR, ACM and FKM, as long as these are suitable for the operating temperatures.
Features and Benefits
| Features | Advantages and Potential Benefits |
|---|---|
| Good pumpability in centralised systems even at low temperatures | Potential to rationalise onto one product |
| Designed for centralised lubrication systems | Reduced operating costs compared to greasing by hand due to lower maintenance costs and economic usage |
| Reduced wear under heavy or shock loading and vibration. Excellent anti-wear performance | Good equipment reliability and availability |
| Good protection against rust and corrosion and resistance to water washout | Enhanced equipment protection and good lubrication even in presence of water |
| Controlled oil release | Balanced lubrication properties for longer service life |
Applications
Mobil Chassis Grease LBZ is suitable for central lubrication systems using semi-fluid greases in commercial vehicles. It can be used between –50°C and 100°C. It is recommended for the semi-fluid grease systems of the following manufacturers:
- W Vogel, Berlin (to -25°C )
- Mercedes Benz (Sheet 264 Semi-Fluid Greases).
Specifications and Approvals
| Mobil Chassis Grease LBZ meets or exceeds the following industry specifications: | |
|---|---|
| Mercedes Benz page 264 | X |
| DIN 51826: (2005-01) | GP00G-50 |
| Mobil Chassis Grease LBZ has the following builder approvals | |
|---|---|
| MB-Approval 264 | X |
Typical Properties
| Mobil Chassis Grease LBZ | |
|---|---|
| NLGI Grade | 00 |
| Base Oil Viscosity @ 40°C, cSt, ASTM D 445 | 40 |
| Thickener Type | Lithium-Calcium |
| Colour | Green |
| Penetration, Worked, 25 ºC, ASTM D 217 | 400-430 |
| Dropping Point, D 2265, C | ›160 |
| 4-Ball Weld Load, N, DIN 51350-4 | 2000 |
| Corrosion protection, EMCOR, ISO 11007 | 0-0 |
| Flow Pressure Test @ -30°C, hPa, DIN 51805 | 56 |
| Temperature range, continuous operation | -50°C to +100°C |
Recently Viewed Products
- Castrol Chain Wax Aerosol (Category: Automotive Greases)
- Texaco Multigear EP (Category: Automotive Gear Oil)
- Shell Spirax ASX 75W/90 (Category: Automotive Gear Oil)
- Mobiltrans HD (Category: Automotive Gear Oil)
- Mobil Delvac Synthetic ATF (Category: Automotive Gear Oil)