Anderol 555

ANDEROL 555
ANDEROL 555 SYNTHETIC COMPRESSOR OIL (ISO VG 100)

Anderol 555 General Information:
ANDEROL 555 is an ISO 100 diester based synthetic compressor lubricant specifically designed to provide longterm lubrication in process gas compressors.

ANDEROL 555 TYPICAL PROPERTIES:

ANDEROL 555 SALES SPECIFICATIONS
PROPERTY	TEST METHOD	MIN	MAX	TYPICAL RESULTS
Anderol 555 Viscosity @ 40°C, cSt	ASTM D-445	90.0	110	97
Anderol 555 Viscosity @ 100°C, cSt	ASTM D-445	---	---	9.3
Anderol 555 Pour Point, °C	ASTM D-97	-	-30	-35
Anderol 555 Flash Point, °C	ASTM D-92	230	-	274
Anderol 555 Specific Gravity, 15.6°C	ASTM D-4052B	0.95	0.97	0.96

ANDEROL 555 ADDITIONAL INFORMATION
Anderol 555 Autoignition Temperature, °C	ASTM E-659	410
Anderol 555 Conradson Carbon Residue, %	ASTM D-189	0.02
Anderol 555 Evaporation, 22 hrs @ 99°C, %	ASTM D-972	<1.0
Anderol 555 Copper Strip Corrosion, 3 hrs @ 100°C	ASTM D-130	1A
Anderol 555 Demulsibility @ 54°C, ml oil/water/emulsion (min.)	ASTM D-1401	39/38/3 (<60)
Anderol 555 Four-Ball Wear, 1200 rpm, 75°C, 40 kg, 1 hr, mm	ASTM D-2266	0.8

APPLICATIONS

For cylinder and frame lubrication of reciprocating compressors and vacuum pumps using the following gases:
Air Carbon Dioxide (dry) Hydrogen Sulphide (dry) Propane
Butadiene Ethylene Natural Gas Synthesis Gas
Carbon Monoxide Helium Methane Sulphur Hexafluoride
Furnace (crack) Gas Hydrogen Nitrogen
Nominal Operating Range is –15°C to 230°C (5°F to 445°F)APPROVALS

ANDEROL synthetic lubricants are the only long-life synthetic lubricants with over 20 years of successful performance. They are field tested, approved or recommended by most major compressor manufacturers.
Should you have any questions regarding the suitability of ANDEROL 555 compressor lubricant for a specific manufacturer's model compressor, please check with us here at QC Lubricants.

ADVANTAGES

• No metallic additives to interfere with catalytic processes

• Fewer oil changes

• Lower oil consumption

• Reduces compressor maintenance

• Eliminates lacquering and deposits

• Greatly reduces fire and explosion hazard

• Reduces energy consumption

• Separates water condensate rapidly

ANDEROL 555 COMPATIBILITY

The following seals, paints, and plastics are recommended for use in contact with Anderol Synthetic Lubricants. Materials not recommended are also shown. For more information on other materials, see the Compatibility Guide.
RECOMMENDED - Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin, Celcon, and PBT.
NOT RECOMMENDED - Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystyrene, PVC, and ABS

Ask a question about this product

Contact Us

Anderol 555

Anderol 555

Recently Viewed Products